The Unistar Command Center combines a full feature 200 Watt siren and an 8 function light control switch panel all into one dual color keypad driven unit. The control head features a dual color (Red & Green) lighted keypad, a 4-position progressive slide switch with LED indicators, LED speaker diagnostics, an attached noise canceling PA microphone and are available with or without a flush mounting flange. Selectable operating modes are Wail, Yelp, Hands Free, Phaser, Manual, Alert, and Radio. Operating tones are Wail, Yelp, Air Horn, Phaser, Manual, and Two-Tone. Positive and negative switching for AUX and Park Kill inputs. The Unistar Command Center is protected against speaker shorts with a self-resetting circuit and a high & low voltage shutdown feature. These units also feature, integrated horn ring transfer output, jumpers for option selections, public address override and separate volume control for the radio repeat and public address functions. The amplifier and switch box mounts conveniently and connects to the controlhead through a telephone style cable. Ships complete with wire harness with positive locking connector, mic clip, mounting bracket, hardware, 30 standard funtion labels, and instructions.
LED speaker diagnostics
Wail, Yelp, Airhorn, Phaser, Manual, and Two Tone
Self-resetting circuit protection against speaker shorts
Integrated public address microphone
Eight light functions
Dual color backlighting on keypad (Amber & Red)
Four position progressive slide switch with LED indicators
Park Kill input
Positive locking wiring harness included
Universal mounting bracket or Flange mount available
Replaceable jumpers for option selection
Positive and negative switching for AUX and PKILL inputs
High and Low voltage shutdown protection
Truck mount amplifier
30 Standard function replaceable labels
Drives one or two 100 Watt speakers
Control Head: 3 3/8" High X 6 3/4" Wide X 3/4" Deep
Amplifier: 2 1/2" High X 7" Wide X 7 3/8" Deep (plus 3/4" flange)
Weight: LCS800 & LCS800-F: 8.5 lbs.
Output: 100 or 200 Watts (1 or 2 speakers)
Voltage: 10V - 16V DC
Amp Draw: 8 Amps (per speaker)
If you need a detachable mic or you need the mounting flange, please remember to add those features below.